麻豆精品国产自产在线,欧美日韩国产这里只有精品,亚洲精品国产精品国自产,亚洲欧美中文日韩V在线观看

Selection and daily maintenance of retaining rings2023-03-30

Selection guide for retaining rings: Because retaining rings are generally made of spring steel 65Mn, their comprehensive mechanical properties are better than those of carbon steel after heat treatment, but they have overheating sensitivity and temp…

Design and Application of Open Retaining Ring2023-03-30

In fact, everyone has some understanding of the retaining ring, but you may not have touched on the open retaining ring. As the name suggests, the initial retaining ring is a retaining ring with an open and unclosed shape, which is often used to fix …

Introduction and types of corrugated washers2023-03-21

Wave Spring Washers, also known as Wave Spring Washers. Waveform springs mainly consist of single-layer and multi-layer waveform springs, among which multi-layer waveform springs are also known as multi-layer waveform washers. They are a circular rin…

The difference between corrugated washers and ordinary washers2023-03-21

Wave washer is a type of spring washer, which is different from flat washer, so we should pay attention to distinguishing between wave washer and flat washer in use. Otherwise, it may cause us unnecessary trouble during use. The difference between wa…

The main function and tightness of waveform washers2023-03-04

The waveform washer product can be customized according to user needs, and it is now very popular in many industries. And with the development of technology, performance has also improved. However, due to factors such as craftsmanship, the prices of …

The advantages and functions of waveform washers2023-03-04

The waveform washer is located on different sides of the central surface, tangent to the corresponding surface of the first or second support surface parallel to the central surface, and is improved by improving its initial compression behavior. Wave…

Introduction to the functions of waveform washers2023-02-20

Waveform washers are a type of multi-layer thin metal ring, each layer of which has multiple peak valley elastic metal components. They are commonly used in equipment such as spacecraft, bearings, flow valves, pressure valves, clutches, isolators, ax…

What is the use of corrugated washers?2023-02-20

What is the use of corrugated washers? A corrugated washer is a thin metal ring with multiple peaks and valleys in each layer. Usually used in equipment such as spacecraft, bearings, flow valves, pressure valves, clutches, isolators, axial piston pum…

Introduction to relevant knowledge about waveform washers2023-02-18

The waveform washer undergoes specific heat treatment methods, and according to the specific situation, the hardness is generally controlled between HRC 44 and 55, with a black surface and good elasticity. Widely used in industries such as motors, te…

What is the function of waveform washers? Why is there a thickened layer on the outer edge?2023-02-18

Waveform washers are thin circular elastic metal components composed of many peaks and valleys. It is made of high-quality spring steel, heat treated by special methods, and then its hardness is controlled according to requirements. The waveform wash…

Reasons for Sealing Failure of Waveform Washers2023-02-15

Waveform gasket sealing is the main method of modern pump shaft sealing. Although it is not easy to achieve complete leakage without it, it is completely possible to achieve a small and acceptable leakage amount. But what is the reason for the embarr…

What standards can be used for the application of waveform washers?2023-02-15

Severe wear or damage to the bearings can cause severe axial movement of the pump shaft, which is also one of the reasons for the leakage of the mechanical seal of the waveform washer. With the development of science and technology, new sealing forms…